For decades there seemed to be just one dependable way for you to store information on your personal computer – having a hard disk drive (HDD). Nevertheless, this type of technology is already showing its age – hard disk drives are actually loud and slow; they can be power–ravenous and have a tendency to produce lots of warmth throughout intensive procedures.

SSD drives, alternatively, are fast, consume a lesser amount of power and are generally far less hot. They feature a whole new method of file accessibility and data storage and are years in advance of HDDs when considering file read/write speed, I/O effectiveness as well as energy efficacy. Figure out how HDDs stand up against the more recent SSD drives.

1. Access Time

Image

SSD drives provide a completely new & innovative way of file storage based on the usage of electronic interfaces rather than any moving components and turning disks. This brand–new technology is much quicker, permitting a 0.1 millisecond data access time.

Image

HDD drives continue to make use of the same fundamental data access technology that was initially created in the 1950s. Even though it was substantially upgraded after that, it’s slow as compared to what SSDs will offer. HDD drives’ file access rate can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

On account of the exact same radical technique that permits for better access times, you may as well appreciate far better I/O performance with SSD drives. They will complete two times as many operations throughout a given time compared with an HDD drive.

An SSD can manage at the very least 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance gradually increases the more you employ the drive. Nevertheless, as soon as it actually reaches a particular restriction, it can’t proceed quicker. And due to the now–old technology, that I/O limitation is significantly less than what you could get having an SSD.

HDD can only go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives are lacking any sort of moving parts, which means there’s far less machinery inside them. And the fewer physically moving elements you will discover, the lower the prospect of failing can be.

The normal rate of failing of any SSD drive is 0.5%.

Image

Since we have documented, HDD drives make use of spinning hard disks. And anything that utilizes a number of moving elements for lengthy amounts of time is more likely to failing.

HDD drives’ common rate of failing ranges between 2% and 5%.

4. Energy Conservation

Image

SSDs lack moving components and require little or no chilling energy. They also require a small amount of energy to perform – tests have demostrated that they can be operated by a common AA battery.

As a whole, SSDs take in amongst 2 and 5 watts.

Image

As soon as they have been built, HDDs have always been extremely electric power–greedy devices. When you’ve got a web server with many different HDD drives, this tends to boost the monthly utility bill.

Normally, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

The speedier the data accessibility speed is, the swifter the data requests are going to be adressed. Because of this the CPU do not need to arrange allocations looking forward to the SSD to reply back.

The normal I/O delay for SSD drives is only 1%.

Image

When you use an HDD, you must devote additional time anticipating the outcome of your file request. It means that the CPU will remain idle for further time, looking forward to the HDD to reply.

The average I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

Image

The vast majority of Castle Host’s brand–new machines now use solely SSD drives. Our very own tests have shown that using an SSD, the typical service time for any I/O request whilst doing a backup stays below 20 ms.

Image

In comparison with SSD drives, HDDs offer substantially sluggish service rates for input/output demands. Throughout a server backup, the regular service time for an I/O request ranges somewhere between 400 and 500 ms.

7. Backup Rates

Image

Talking about backups and SSDs – we’ve witnessed an exceptional enhancement with the back up rate as we switched to SSDs. Right now, a regular web server backup requires just 6 hours.

Image

We applied HDDs mainly for lots of years and we have now pretty good knowledge of precisely how an HDD performs. Generating a backup for a hosting server designed with HDD drives can take around 20 to 24 hours.

With Castle Host, you may get SSD–driven web hosting solutions at the best prices. The website hosting plans plus our Linux VPS hosting feature SSD drives automatically. Get an web hosting account here and observe how your websites will become far better promptly.


  • Service guarantees

  •  
  • Subscribe today. You won’t see any setup charges and you will have total root and SSH access to the server. 99.9% network uptime is warranted.
  • Compare our prices

  •  
  • Preview the tools and characteristics coming with our Virtual Private Servers. You can begin with a smaller VPS Hosting server and upgrade with just a click of the mouse as your demands expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • You can make contact with us day and night by email or by making use of our ultra–fast ticketing system. Castle Host provides a 1–hour response time frame warranty.